Категории

    Новости

    Тонгкат Али
    http://silverfox.in.ua/product-tag/tongkat-ali/ (англ. Long Jack, Tongkat Ali) – это средство, в основном используемое спортсменами для повышения уровня тестостерона и серьезных силовых нагрузках. Но

    Иван Айвазовский
      этой (Ованес Айвазян, Иван Гайвазовский, Aivazovsky, Ivan. 1817-1900), –   русский живописец, мастер морского пейзажа (маринист). Популярнейшие картины Айвазовского - “Радуга” (1873 г. ), “Чёрное

    Изменение фона в шаблоне Joomla
    6. Сейчас колдуем с CSS так, чтоб было похоже на данный макет. Поехали: Я заключил меню в блочный элемент levoe-menu: Таким макаром, Joomla генерирует последующий код: Основная Сырье Аддитивы Диоксид

    Как быстро перенести сайт на Joomla Часть 2 Восстановление из резервной копии
    Как запустить цикл? У меня на данный момент выводит одну и туже картину либо просто "i" $q ="SELECT vm.`file_url_thumb` FROM `#__virtuemart_medias` vm LEFT JOIN `#__virtuemart_product_medias` vpm ON vpm.`virtuemart_media_id`

    Анализ сайта яндекс
    Продвижение веб-сайта в ТОП Yandex'а и Google (других поисковых машин) - главная цель для хоть какого вебмастера либо оптимизатора. В попытке закрепить собственный ресурс на фаворитных позициях выдачи

    Материнские платы на 2 процессора
    Для тех у кого нет времени, чтоб прочесть всю статью, я сразу даю рекомендуемые модели материнских плат под различные микропроцессоры. На сей день оптимальными по соотношению стоимость/качество являются

    Обозначение смайликов в картинках
    Здрасти, читатели блога Веб-сайт с нуля. Доводилось ли вам думать над тем, что означают смайлы, которые вам прислали, и как на их ответить? Сталкивались ли с необходимостью выразить свои эмоции очень

    Форд мондео ремонт
    На Форд Мондео ремонт силовых агрегатов случается довольно изредка, так как моторы южноамериканского производителя обычно надежны и долговечны. Особенного внимания стоит 2, 5л бензиновый вариант, снаряженный

    Процессоры intel socket 775
    Сокет (socket) микропроцессора - разъем, место на материнской плате компьютера куда вставляется микропроцессор. Микропроцессор, до того как он будет установлен в материнскую плату, должен подходить ей

Полезные материалы

How to wifi connect to a cell phone. Setting up a Wi-Fi connection on Android

  1. Wi-Fi on iOS
  2. Wi-Fi on Windows Phone
  3. Wi-Fi on Android
  4. Connection setup
  5. How to connect a wireless Wi-Fi network on the phone running on the Android operating system
  6. Wi-Fi is not connected on the phone.
  7. Wi-Fi connectivity issues on Chinese smartphones
  8. Incorrect work of Wi-Fi, DNS server
  9. Video: Access Point
  10. Basic settings
  11. Advanced settings

Thanks to data transfer technology via Wi-Fi, people can take advantage of its capabilities at any point (where there is a Wi-Fi network). Of course, simply installing Wi-Fi is not enough. To complete its work on mobile devices, it is also necessary to configure it.

Wi-Fi on iOS

Wi-Fi setup may differ dramatically on each operating system. Most of the Internet required devices on iOS base . Naturally, the owner of such a device can perform simple actions (make calls, send SMS, etc.), but for all the rest, such devices require an Internet connection.

In order to set up an iOS device, you need to have a point within reach. Wi-Fi access to which you need to connect. In order to configure the Wi-Fi network on your device, you need to go to the settings mobile device and select "Wi-Fi networks". After you click on the button Wi-Fi on , a list of all will automatically open available connections . In this list, you need to find the one you are going to connect to, click on it and enter the SSID-key. After the first successful login, the mobile device system automatically remembers the login information.

Wi-Fi on Windows Phone

In order to use the Wi-Fi network on a mobile device that has an operating windows system Phone, you need to select the "Settings" item in the list of applications, and then find Wi-Fi. In the “Wi-Fi network” line, you need to turn on the connection, after which the phone will automatically search for all available networks . You need to find the connection to which you are going to connect and select it. Next, you need to enter a username and password, and only after that, the phone will be able to connect to the network.

Wi-Fi on Android

On mobile devices, on Android base everything is about the same. First you need to go to "Settings" and select "Wireless Networks". Here you must check the box next to the Wi-Fi point. The phone will automatically search for all available networks and, if it finds those that are not blocked, it will connect to them. If you want to connect to your own network, then you need to go to the “Wi-Fi Settings” item, where you can see a list of all available connections. In the list you need to find the connection that suits you and select it, enter the password and in case of successful login, you will be able to use the Wi-Fi network.

After buying a smartphone, users have a reasonable desire to go from a mobile device to the Internet using a wireless connection. However, it is not always possible to realize this aspiration from the first time. In order not to encounter problems when connecting to the Internet, you need to know how to set up Wi-Fi on your phone.

All the actions described below are equally suitable for phones and tablets running on the Android OS.

Before you start setting up Wi-Fi on your phone, you need to turn on the adapter. This can be done using the widget on the screen or in a regular system menu phone (tablet). On the widget to turn on the adapter, just click on the corresponding icon:

On the widget to turn on the adapter, just click on the corresponding icon:

If there is no widget on the screen, use the menu of your mobile device:


The adapter is turned on - the device will automatically start searching for available Wi-Fi points.

Please note: when Wi-Fi is always on, the battery discharges faster than when the adapter is off.

In addition, if you do not turn off Wi-Fi, then when you move around the city, your phone will “catch” all available wireless networks and issue notifications about the possibility of connecting to them.

Connection setup

Immediately after turning on the adapter, a list of all available points should appear on your phone. You need to choose your network and, if necessary, enter a password (if you installed it when setting up the router). Usually, nothing else needs to be done to set up the Internet on Android. But it happens that it is not possible to make the connection in the automatic mode - in this case it is necessary to configure the connection.

But it happens that it is not possible to make the connection in the automatic mode - in this case it is necessary to configure the connection

First of all it is necessary to pay attention to the second section. If the router does not activate the automatic detection of network parameters (DHCP) on the router that distributes WI-Fi, then in the “IP Settings” section, select “Custom” and manually specify all the necessary data (IP address, gateway, DNS). First of all it is necessary to pay attention to the second section

You can find out the necessary parameters from your network administrator or from your provider if you are trying to connect to a personal access point. After saving the configuration, try again to connect the tablet to the Internet.

Make sure that   Wi-Fi icon   The status bar is lit in blue, not blue Make sure that Wi-Fi icon The status bar is lit in blue, not blue. The more points are colored blue, the stronger the signal and the more stable the connection to the Internet.

Some people think that Wi-Fi is free Internet , but it is not so. Of course, it is free, but this requires an access point.

Usually such a service is provided by cafes, supermarkets, and you can also install a router at home or via a computer if it is equipped with a Wi-Fi module.

Navigation

Wi-Fi option is presented on many phone models. Consider in detail the features of the connection and use of some of them.

How to connect a wireless Wi-Fi network on the phone running on the Android operating system

Before connecting to a wireless network, make sure that Wi-Fi module connected. Do the following:

  • go to phone settings
  • Select the Wi-Fi module in the " quick setup "By clicking on it
  • move the slider to the right

After a few seconds, a list of wireless networks you can connect to will appear in this section below. If you see a lock schematic next to the wireless icon, it means that it is password protected.

At this stage, decide to which network you want to connect your phone:

  • click on it
  • After that, a small dialog box will appear on the smartphone display with the name of the network you selected, information about the signal level, type of protection and code password if it is protected
  • if you know the password, enter it in a special field with a flashing cursor
  • in order not to make a mistake when entering the password, put a tick in the special field below "Show password"

Thus, you can see exactly which characters you enter.

After entering the password, click "Connect". The phone will inform you that you have successfully connected to the selected network.

Wi-Fi is not connected on the phone.

The first thing you need to do is make sure that your device has the current date and time. If this is a smartphone and you pulled the battery out of it, then when turned on, the wrong date may be displayed. Because of this, it will not be possible to connect to Wi-Fi.

To solve this problem, set the correct date:

  • open the menu item "Settings"
  • find the item "System" section "Date and time"
  • set the current date, time and save settings
  • connect to wifi


open the menu item Settings   find the item System section Date and time   set the current date, time and save settings   connect to wifi

If after these manipulations the problem is not solved, then check the Wi-Fi password:

  • Find in the settings an access point to which you can not connect
  • Hold down the finger until a window appears in which the “delete” and “change” items appear
  • choose "change network"
  • in the “password” line, enter the Wi-Fi password, observing all the rules of large and small letters (if there are any)
  • click "save"
  • connect and check if your problem is solved

If you entered the password correctly, but there is no connection, use special program Wifi Fixer. It is completely free to download in Google play . Install the application and restart the smartphone.

Turn on this program and connect to the network. In the "KNOWN" section, the application will show those access points that are ready to connect. Wifi program The fixer works in automatic mode, i.e. fixes all the problems that have arisen.

If the program does not cope with the task, scan your phone for viruses. To do this, run the anti-virus application that is installed on your smartphone (or install it from Play market ).

Wi-Fi connectivity issues on Chinese smartphones

It often happens that when you enter the wrong password and try to connect to Wi-Fi phone instead of a message about the connection, it will give you a message: “Saved, network type”. This is followed by several authentication attempts and a connection error. To troubleshoot, do the following:

  • call the dialog box by clicking on the selected network
  • in this window, select "delete"

Do not worry! The network will not disappear anywhere. She will reappear in this list. Then you can repeat the operations done by entering a password.

If you entered the correct password, but the phone gives an authentication error:

  • turn off the Wi-Fi module, and then turn on
  • try to restart the phone
  • connect to wifi


turn off the Wi-Fi module, and then turn on   try to restart the phone   connect to wifi

The problem may be in the router itself, which distributes the wireless network. Try to connect to another router.

It does not work, then reset the smartphone to the factory settings, having previously made backup copy settings.

IMPORTANT! If you plan to use Wi-Fi, in the settings of the phone output the access point "with request".

Incorrect work of Wi-Fi, DNS server

There are cases where the incorrect operation of the wireless Wi-Fi networks depends on the DNS server. For example, if you go to the Play Market and do not download pictures, games and applications are not downloaded.

Typically, modems are configured in such a way that they receive automatic DNS servers from company providers. It happens that the servers are not working correctly or incorrectly configured. Universal way - this is to enter a public DNS server from Google:

  • go to the phone settings
  • Wi-Fi network
  • keep your connection
  • in the window, select the "change" or "Statistical IP" item (for different phone models)
  • enter the DNS: 1 8.8.8.8
  • enter DNS2: 8.8.4.4

Save and verify application downloads.

As soon as you are connected to a wireless Wi-Fi network, check Internet access. Open your browser and use!

Video: Access Point

Owners of modern phones are often interested in how to establish a connection and set up a WiFi network on Android. Users have the ability to connect to wireless networks , add and remove signal sources, change the parameters of your device for saved connections. The gadget can remember the network with which it was connected earlier, and automatically connect to them, being in the right range.

Basic settings

  1. Open the Settings application on your device.
  2. On the Wai-Fay button, move the lever to the "on" position.
  3. In the list of available wireless connections, select any connection. If the network is protected and you need a password for access, a corresponding request will appear when connecting.
  4. After a successful connection, the status “Connection established” appears. After that, the network will be saved and the device will automatically find it, once inside the access zone.

Most connections are automatically listed. You can add a connection that is not listed in it, does not display its name (SSID), or is outside the range of access. If the desired network is not in the list, but is nearby, you need to open "Advanced" -> "Refresh". To add a new connection, you need:

  1. Activate the Wi-Fi button.
  2. Make sure that the "air" connection is enabled.
  3. At the bottom of the list, select "Add." On Android 6.0 and older operating systems, you first need to click "Advanced" and "Add Network."
  4. Enter the SSID and other security information if necessary.
  5. Click on “Save”.

If you do not want the device to automatically connect to the saved zone, you can delete it If you do not want the device to automatically connect to the saved zone, you can delete it. For this:

  1. Open the Settings app on the gadget.
  2. Activate wireless connection . Make sure it is turned on.
  3. Select a saved network. On Android 6.0 and older operating systems, first click on "Advanced" and "Saved".
  4. Then tap on "Delete."

To view the saved information about WiFi on your phone or change its settings, you need to:

  1. Open the Settings app.
  2. Put into active mode Wi-Fi.
  3. Now it's time to connect to a specific network. To view information about her, you need to tap on her name. Here you can see the connection status, signal quality, communication speed, frequency, and security information.
  4. To change the settings, you need to click on the name of the connection and hold your finger for a while. Here you can change it or delete it.

Advanced settings

If you need to connect WiFi on a tablet or smartphone via a proxy server, you should use this instruction:

  1. Go to the Settings app.
  2. Activate Wi-Fi.
  3. Click on the network name and hold your finger for a while.
  4. Tap on "Change."
  5. Next to the additional parameters, click on the down arrow.
  6. Next to the Proxy, select the down arrow again. Then - “Configure manually” and “Auto-detect proxy server”.
  7. Configure the proxy if necessary.
  8. Select "Save". These data must be entered separately for each case.


You can change the advanced parameters of Wi-Fi. For this we need the following actions:

  1. Enter the Settings app.
  2. Activate Wi-Fi.
  3. Click on "Advanced" and "Advanced Settings." The list of available options may vary depending on the model of the device and the version of the operating system.
  4. By installing digital certificates, you can identify your device to access VPN, Wi-Fi and other functions.
  5. Installation Wi-Fi Direct allows you to connect directly to other devices that also use this feature.
  6. The WPS button enables secure wireless adjustment.
  7. The WPS Pin Entry option allows you to enter a personal identification number to protect Wi-Fi.
  8. The Network Notifications feature allows you to receive alerts when the unit detects available communication options over the air.
  9. Button Wi-Fi On Sleep allows you to customize the signal processing for a smartphone that is in sleep mode.
  10. The “Signal Range” option allows you to extend the operating frequencies.

It must be borne in mind that operating system may differ on different models. The above instructions are for gadgets under running Android 7.0 and higher. On other versions, the configuration process may be slightly different, but in most cases the difference is not significant.