Internet connection icon in the right. How to remove the red cross on the Internet icon

  1. Possible problems in the network connection
  2. The Internet works, and the red cross icon
  3. How to return the sound and internet icon to the taskbar
  4. How to return the sound and network icon to the taskbar in.
  5. Returning the missing language bar.


The local area connection icon serves as a kind of indicator that reflects the presence or absence of a connection. You, probably, noticed that when you do not have Internet, this icon is crossed out with a red cross.

Typically, the local area connection icon is located on the taskbar, or is located in the tray. When you hover over it, the connection status is displayed, and when you click with the right or left mouse button, you can make network connection settings (the same settings are available in the control panel).

Now let's go straight to solving the problem of missing the local area connection icon. Earlier on the site with us you could already find an article about that,. So, the techniques for solving both tasks are absolutely identical. But as they say: repetition is the mother of learning.

And so that the icon of the local area network connection to the taskbar is necessary:

1. Open the tray and click " Customize ."


2. A window for editing notification area icons will open. Click on " Enable or disable system icons ."



3. This will trigger the launch of another window " System Icons ", in which you will see a list of available system icons for Windows 7, as well as their behavior. They can be either off or on.
Set “ On ” against the “ Network ” icon.


Then just click the "OK" button and you can exit all open windows. The Local Area Connection icon appears again on

one. Possible problems in network connection
2. The Internet works, and the connection icon with a red cross

Possible problems in the network connection

How to start a search for a problem is with a cable. You need to make sure that it is working. Of course, you will not be able to verify the entire line, but at least indirectly you can check it. Try connecting to another network card on your computer if there is a second connector or to another computer. Open up network connections and see if there is a connection, are there service packs.

Or maybe you have a router, plug into any Lan connector, cable, see if the light indication has appeared. If the cable is OK and the network connection is active, you need to check the network settings. To do this, select the connection, go to the properties and check the settings of the tcpip protocol, in most cases the ip address and the dns server should be in automatic mode.


Just in case, restart the DHCP and DNS services. Go to Computer Management by clicking Win + X, the service point. Find them in the list, select the service with the right mouse button and select the Restart item.

Or, you can simply launch Troubleshooting by right-clicking the network connection icon on the desktop, the system will itself perform troubleshooting, reset the adapter, and restart the services.


We check the network card by self-diagnosis through the command line. Type ping 127.0.0.1, the so-called loop, then try to ping some resource, for example Yandex: ping ya.ru if you are on a local network, then type the address of a computer on the network, for example ping 192.168.0.70 go ahead.


It happens that the connection is supposedly active, but there is a constant hopping-disconnect, rather not in order LAN card , replace. We reset the route table in command line route -f. Perhaps there are incorrect entries, more often due to viruses. The table will be overwritten during the work with the network.

If you have other types of connections, such as PPPoE, L2TP, PPTP, then you should check the settings of these connections, logins, passwords. It happened that the providers themselves gave out incorrect settings for connecting to the network. Delete and recreate connections.

I haven’t met antiviruses for a long time to block the network by themselves, there was such a problem in some version of the antivirus, however, it is always possible to prohibit the use of the network forcibly. In this case, the network connection will be active, but the antivirus or firewall will block the network. You must disable or enable network usage.

Of all these problems, we cannot exclude problems with the provider, even if by all visible signs such as the network is working. The network is a complex structure, contains many settings and services. For example, if suddenly the DNS service stops working and cannot access the site, then, knowing its ip-address, you can still visit it.

The Internet works, and the red cross icon

And let's move on to the main problem, displaying a red cross on the taskbar of the network connection indicator.

This problem is observed in some computers with multiple network connections. Wireless and LAN connection. Usually the computer is connected to the Internet via wi-fi, and the local network unavailable at this moment and this inaccessible network is displayed in the panel. It is not clear that this is a system glitch or a problem in the drivers. Eliminated by removing all network drivers connections in the device manager.


Then he updated the configuration of the equipment, the system determined the network equipment, if possible installed it.


For a still connection (usually wireless), I downloaded the driver on the manufacturer’s website. If you are using a driver pack, tick only the missing equipment. If the driver is not found or is not installed, then go straight to the manufacturer’s website to search for your model. Sometimes manufacturers make a setup. They write that a wireless network card from about five manufacturers can be installed on a laptop and you have to download them all and install them one by one until it works. Because it is not always possible to determine the manufacturer by equipment id.

Recently, when surfing the Internet, I often met in comments or on specialized websites, such questions as: the language bar disappeared, the sound and Internet icons, how to return. Let's look at what might be causing these icons to disappear.

First of all, it is the human factor. When setting up the system, somewhere not there they removed the check mark or accidentally deleted the icon itself. The second option may be the appearance of viruses on the computer. But, these cases are not as common. In case you are sure that the virus is the cause of everything, you can check your computer using free program Dr.Web Cruit.

But let's go back to how to restore the missing language bar and icons.

How to return the sound and internet icon to the taskbar

The first is to consider how to return the icons of sound and the Internet in Windows 7. To do this, enter the " Control Panel " -> "".

Here, opposite the “Network” and “Volume” icons, there should be a tracking parameter “ Show notification icon ”.


Here, opposite the “Network” and “Volume” icons, there should be a tracking parameter “ Show notification icon ”

But, if you did not find the necessary items in this area, then proceed to the next setting by clicking on " Enable or disable system icons ".


But, if you did not find the necessary items in this area, then proceed to the next setting by clicking on  Enable or disable system icons

A window opens in which opposite the desired icons (Volume, Network) set the parameter " On ".


A window opens in which opposite the desired icons (Volume, Network) set the parameter  On

After saving the settings, the sound and Internet icon will return to the taskbar.

How to return the sound and network icon to the taskbar in.

In XP, these icons are returned separately, in different settings. For example, to display the network, also go to “Control Panel” -> “Network Connections ” and then open the properties “ Local Area Connections ”.


And at the bottom of the window, check the box " When connected, display the icon in the notification area ."

For sound, open the “ Sounds and Audio Devices ” item, where we also tick the “ Display the icon on the taskbar ” box.

Returning the missing language bar.

For Windows XP, go to the following path: " Control Panel " -> "" -> " Language " -> " Details ".

" Language bar " -> check " Display language bar on the desktop ."

In Windows 7, the path is similar to “Control Panel” -> “Regional and Language Options” -> “Change Keyboard ...”.

Tab " Language panel " -> " Pin in the taskbar ." After that, the missing language panel should return to its place.

After going through all these steps, you can check whether icons appear or not. If you have marked everything correctly, the icons must appear. But if the recommendations described above did not help you and the language panel that disappeared did not appear, then leave your comments, try to find a solution to the problem together.

How can I bring an Internet icon to my desktop?

Wizard Answer:

Any PC user knows for sure that the most popular dad and applications shortcuts are usually located on the desktop of the monitor screen. With a fairly frequent access to the network, it is much more efficient and rational to place the Internet icon on the desktop. So you do not have to waste time searching necessary information in the folder where you originally placed this icon.

The number of icons on the desktop is determined by the tasks that you set for yourself. You may need to place one or two icons. When the Internet is automatically connected to the system, a single browser shortcut is enough on the desktop. In the event that the user logs on to the Internet, you need to add another icon. This is a shortcut that is intended to connect to the network.

To connect to the network directly from the desktop, you need to select the "Start" command. You can use the “Windows” key and select the “Network Neighborhood” option in the menu. A folder will open. Pay attention to the left part of the window where the typical tasks panel is located. Select "Display Network Connections." The panel may not be displayed on the screen. In this case, go to the “Tools” menu, go to “Folder Options” and mark the line “Displaying a list of common tasks in a folder” with a marker. It is located in the “Tasks” group on the “General” tab. Everything. It remains to apply the settings.

As soon as all network connections appear on the monitor, find the icon you need and click on it with the right mouse button. In the context menu that opens, in the “Desktop (create shortcut)” submenu, select the “Send” command. There is another option: using the cursor, select the desired connection icon and, holding it with the left mouse button, drag it to the desktop.

To place a shortcut to your desktop browser (a program that helps you work on the Internet), do the same. Go to the directory in which the browser is installed. The path for passing most often looks like this: “My Computer”, then the disk with the “Program Files” system and the folder with the “name” of the browser. Select the file to run - “IEXPLORE.exe, firefox.exe”. Repeat with him all the same steps that were described above.

If you wish, you can arrange the icons of the browser and network entry on the panel quick launch to the right of the start button. Use the help of the mouse. “Hook” the desired icon with the cursor and, while holding the left mouse button down, drag it to the area of ​​the quick launch toolbar located on the taskbar. If there is not enough space on the panel, uncheck the marker with the line “Fasten the taskbar” by clicking on it with the right mouse button. Adjust the size to the desired and secure the resulting taskbar.

How can I bring an Internet icon to my desktop?